The mattress Opticare X Mobile mode is intended to provide a less immersive surface to improve comfort and encourage/facilitate independent movement of more mobile patients. 

• Start and activate mobile mode by pressing “MOBILE” icon which shows the setting in progress shown via a flashing mattress image. 
  • Note: When the flashing stops and shows the green mattress image, the setup is complete. Recommended mattress pressure level is automatically preset depending on the patient's weight.
• Mattress air pressure can be further adjusted depending on the patient's needs. 
• Press the plus or minus icon, select a pressure level higher or lower than the value automatically set. 
• Pressure changes on the screen can be seen real time via the green pressure bar. 
• It is also possible to set the intensity and work on microclimate management with the off, low, and high settings. 
• Mobile mode timer can also be turned off or set up by pressing the appropriate plus or minus icons on the multiboard X LCD.
  • Note: When the mobile mode timer is off, mobile mode runs continuously. When the timer is set up, the Opticare X system will automatically return to optimise mode after the timer runs out.
• Any chosen mode and timer can also be seen via the home screen under the mattress tile.

For more information, watch the video below.