Adjust the Multicare X with its lateral tilt 1 degree at a time as needed.

When performing a lateral tilt, check the following:

1. Side rails are up in the direction the bed is turning.
2. Press green go button and choose positioning.
3. From the positioning screen, go to “COMBINED POSITIONING” to tilt.
4. Use the buttons on the multiboard X LCD for precise controls.
5. Buttons on the Accessory Control Panel (ACP), or foot pedals can also be used to control lateral bed tilt.
6. Test haemodynamic stability by doing lateral tilt in small increments.
   • Note: Testing allows the patient to adapt to the position change and tilt as far as tolerated, or until able to turn, assess, reposition, or for a procedure.

There is an option to do automatic, ongoing microshifting using preset ALT program with small angle setting.

Here's a video on Multicare X Microshifting, watch below to learn more.